Home / All / Decoiler / Manual Decoiler /

[MT-700] Uncoiler machine with high quality uncoiler mandrel for coil handling process

[MT-700] Uncoiler machine with high quality uncoiler mandrel for coil handling process

[MT-700] Uncoiler machine with high quality uncoiler mandrel for coil handling process
[MT-700] Uncoiler machine with high quality uncoiler mandrel for coil handling process[MT-700] Uncoiler machine with high quality uncoiler mandrel for coil handling process[MT-700] Uncoiler machine with high quality uncoiler mandrel for coil handling process[MT-700] Uncoiler machine with high quality uncoiler mandrel for coil handling process[MT-700] Uncoiler machine with high quality uncoiler mandrel for coil handling process
CategoriesManual Decoiler
BrandHongEr
ModelMT-700
Uncoiler bobyWelded with steel plates annealed and then polishe
Uncoiler key componentsHigh-strength castings and long-distance bearings
Uncoiler load-bearing tilesFour-blade type and the surfaces are chrome-plated
Uncoiler spindle45# seamless steel tube. After being tempered and treated, it will not be deformed due to long-term load
Uncoiler electric control boxEasy to operate
Uncoiler sensor frameContact induction
Terms of PaymentD/A, D/P, Western Union, T/T
Update TimeMar 19,2024
Detail Information
Applicable Material 
                 Material thickness                                    Strip Width                                          Coil Weight

                    0.1 mm to 2.0 mm                                           20 mm to 700 mm                                                  Up to 3000kgs           
Uncoiler machine with high quality uncoiler mandrel for coil handling process

Coil Width:up to 1200mm
Material thickness:0.1mm-2.0mm

Coil weight:500-3000kgs

Application: Press Feed

Line speed 16 m/min

Pressing arm and coil car for optional 

Suitable for most kind of coil material, such as CR Steel, HR Steel, Galvanized steel, Stainless steel, Pre-painted, Aluminum, Cooper etc.

Model
Coil width
Coil Thickness
Coil I.D.
Coil O.D.
Coil Weight
Expansion
Pressing Arm
Power
Inverter
Speed
MT-700
700
0.1 mm-2.0 mm
450-530 mm
1200 mm
3000 kgs
Manual expansion
Optional
3 HP
Without
16m/min
      Machine wrapped up with plastic film                  Fix decoiler machine into wooden case                         Delivery packages to port 
Most of our decoilers are used in press feed

Honger also provide customization decoilers for 

cut to length line,
coil slitting line,
roll  forming line.

Motorized Decoiler

MT-500 to Australia

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Send the inquiry, Honger is ready to design the best machine solution for you!