- Decoiler Straightener Feeder
- Decoiler and Straightener
- Coil Feeder
- Coil Straightener
- Press Machine
- Stamping Production Line
High Speed Lamination Stamping Line
|Categories||Stamping Production Line|
|Album||View larger image|
|Terms of Payment||L/C, Western Union, T/T|
High-speed stamping technology is an advanced forming and processing technology developed in the past 20 years. Among them, the motor core/rotor stator stamping is a high-tech stamping technology that integrates equipment, dies, materials, and processes.
The modern stamping technology of the motor core/rotor stator parts is based on high-precision, high-efficiency, long-life, multi-position progressive die that integrates each process in a die to perform automatic punching on the high-speed punching bed.
The punching process is that after the strip material comes out of the coil material, it will be leveled by a leveling machine, automatically fed by an automatic feeding device, and then the strip material enters the progressive dies. And the motor core/ rotor stator punching can be continuously completed from punching, forming, finishing,trimming, automatic lamination, blanking with skewed laminations, blanking with rotary laminations or other blanking processes, to finished products of motor core/ rotor stator parts comes from the progressive dies. The entire punching process is done automatically on a high-speed press machine.
The raw material punched by the progressive die is in the form of a roll coil, so the stamping line is equipped with automatic feeding equipment such as double decoiler, s loop straightener machine and cam feeder or high speed nc servo feeder.
Due to the high degree of automation and high speed of the motor core stamping equipment, in order to fully ensure the safety of the progressive dies in the punching process, modern stamping equipment is equipped with an electrical control system in case of any accident. If a fault occurs in the process of making the motor core/ rotor stator, the error signal will be immediately transmitted to the electrical control system. then the electrical control system will send a signal to stop the stamping immediately.
For now, the most common equipment for punching motor core parts is high speed H frame press. It has high stamping accuracy, machine rigidity and reliable machine safety system. The stamping speed is generally in the range of 200 to 600 times/min, which is suitable for automatic laminating of motor cores, and other structure parts needs skewed, rotating and automatic stacking rivets.
Send the inquiry, Honger is ready to design the best machine solution for you!